MINI MOTOR SRL - WORM SCREW GEARED MOTORS
Mini Motor manufactures WORM SCREW GEARED MOTORS for all industrial applications. A wide range of WORM SCREW GEARED MOTORS can be found on the Mini Motor website with single phase or three-phase 2- or 4-pole asynchronous motors, totally enclosed with external ventilation. WORM SCREW GEARED MOTORS with single-phase thermal safety cutout. Class F winding. IP65 protection in accordance with IEC EN 60529.
Mini Motor manufactures wide range of worm screw geared motors.
Worm screw geared motors with motor: Continuous current with permanent
magnets, totally enclosed. Winding Class F. Power 12 or 24 Vdc. Absorbed power
60 W. Protection IP65 in compliance with IEC/EN 60529 standards. Gear unit: With
worm screw and die-cast aluminium gearcase. 20 mm centre distance. CARO bronze
crown with a hardness of 120÷160 HB. The worm is made of tempered steel, with
ground thread. Seal rings in special high-temperature rubber (FKM). Lubrication
with special long-lasting oil. There are 6 available gear ratios (i), from 10 to
80. Rated torque up to 5.2 Nm.
Versions B3-B14.
Worm screw geared motors with planetary gear unit with motor: Continuous current with permanent magnets,
totally enclosed without external ventilation. Insulation Class F. Power
12 or 24 Vdc. Absorbed power 230 W. Protection IP65 in compliance with
IEC/EN 60529 standards. Gear unit: With worm screw and die-cast aluminium
gearcase. 32 mm centre distance. CARO bronze crown with a hardness of
120÷160 HB. The worm is made of tempered steel, with ground thread. Seal
rings in special high-temperature rubber. Lubrication with special
long-lasting oil. There are 10 available gear ratios (i), from 5 to 100.
Version B3 - B5 (B5/S left - B5/D right).
Versions B3-B14.
Worm screw geared motors with planetary gear unit with motor:single-phase or three-phase asynchronous motor with 2 or 4 poles, totally enclosed with external ventilation. Single-phase thermal cutoff Winding Class F. Protection IP65 in compliance with IEC/EN 60529 standards. Gear Unit: with worm screw and die-cast aluminium gearcase. 26 mm centre distance. CARO bronze crown with a hardness of 120÷160 HB. The worm is made of tempered steel, with ground thread. Seal rings in special high-temperature rubber (FKM). Lubrication with special long-lasting oil. There are 10 available gear ratios (i), from 5 to 80. Rated torque up to 9 Nm.
Version B3 - B5 (B5/S left - B5/D right).
Worm screw geared motors with mp motor: Continuous current with permanent magnets, totally enclosed with external ventilation. Winding Class F. Power 12 or 24 Vdc. Absorbed power 60 W. Protection IP 65 in compliance with IEC/EN 60529 standards. Mp3n-Mp4n motor: Continuous current with permanent magnets, totally enclosed without external ventilation. Insulation Class F. Power 12 or 24 Vdc. Absorbed power 230 W. Protection IP65 in compliance with IEC/EN 60529 standards. Gear unit: with worm screw with die-cast aluminium gearcase in the first gear stage and planetary steel gearcase in the second stage . 26 mm centre distance. CARO bronze crown with a hardness of 120÷160 HB. The worm is made of tempered steel, with ground thread. Seal rings in special high-temperature rubber. Lubrication with special long-lasting oil. There are 9 available gear ratios, from 37.5 to 400.
Version B3 (B3/S left – B3/D right) - B5 (B5/S left - B5/D right).
